*Shown with 5.3cfm Electric Compressor and 4gpm gas pump
™
SG7 Ultimate Package™
The SG7 X-Stream™ Ultimate Snow Making Package contains everything you need, and everything you want when making snow. This package is offered at a significant savings over purchasing the components individually. You will receive all the proper components required to make snow including an SG7 X-Stream Snowmaker™, a 5.3cfm Cambell Hausfeld Electric Compressor and a High Volume Snowmaking Pump (upgraded High-Flow Nozzles for the 6gpm and 7.5gpm pumps). In addition a SAH Blow-Out Tool™ to remove water from your snowmaking system and prevent destructive freezing issues and an In-Line Water Filter to prevent sediment and filtrates from entering your pump are included. An optional 2500psi Lance kit with 36” wand with 50’ of extension hose is available to turn your Snowmaking Pump into a powerful pressure washer for year round use. Know Your Flow BEFORE You Make Snow!™ SAH highly recommends testing your water flow in gpm from your water source before choosing your pump. Your pump choice in combination with the SG7 X-Stream™ snow maker and High-Flow Nozzles, will determine how much snow you can make. With the SAH™ 4gpm pump you can create up to 120 ft³/hr or enough to cover approx. 75'’x25’ in 6” of snow in 8 hours. With the SAH™ 6gpm pumps you can create up to 180 ft³/hr or enough to cover approx. 100’x30’ in 6” of snow in 8 hours. With the SAH™ 7.5gpm pumps you can create up to 225 ft³/hr or enough to cover approx. 150’x25’ in 6” of snow in 8 hours. Make tons of snow this winter season with the SG7 Ultimate snowmaking package!
Watch our demonstration video on the Photos/Videos tab below to see how easy it is to set up a SAH™ snowmaking system.
*Choose pump, compressor, and lance kit options in cart
Our Suggestions:
If you are looking for portability, and the ability to make snow at a distance from a power source, consider choosing gas components.
If you are looking for quiet operation because you live in a neighborhood or do not want to refill the gas tanks during operation, choose electrical components.
We highly recommend adding the Lance Kit option to your purchase. This lance kit has been specifically designed to handle the pressure and high water volume
combination that is unique to SAH's snowmaking pumps.
Temperature Requirement 29° Fahrenheit / -2°Celsius or less. See Snowmaking Chart.
™
;){kind=link}
;){kind=link}
;){kind=link}